This site uses cookies for analytics and to improve your experience. By clicking Accept, you consent to our use of cookies.

Conventional ET
S2G2-WS-CT

An affordable, no-nonsense, and high-quality electromagnetic tube inspection instrument? The S2G2-WS-CT is an excellent choice. It offers an economic alternative for conventional tube inspection requirements, while also retaining the ability to upgrade to array capabilities when you need them. The S2G2-WS-CT is easy to use and adjust to your specific needs, with improved functionalities and an industry leading signal-to-noise ratio for the cleanest tube inspection data on the market.

  • Features
  • Includes
  • Several advantages can be found in the S2G2-WS-CT which is a low cost, conventional only inspection instrument. The S2G2-WS-CT does not support array technologies, however, it can quickly and easily be upgraded to give this additional capability when it’s required.
  • EC/ECA Inspection Device (No array capability)
  • EMMA software (with USB dongle license for acquisition, analysis and repporting)
  • power supply
  • cables
  • 2x battery
  • double charger
  • 4-pin to 41-pin adaptor
  • rugged transport case.

Description

Technical specifications

General Specifications
Power Requirements 110V-220VAC, 50-60Hz (Auto voltage sensing) OR Lithium-Ion Battery DoT compliant (RRC2054-2) – 10Hrs typical run time
Operating Voltage 12 VDC Power
Environmental Sealed enclosure, designed for IP55
Size (external dimensions) 33cm x 26cm x 14cm (13” x 10.2” x 5.5”)
Weight (excl. batteries) 4.75 Kg (10.5lb)
Weight (incl. batteries) 5.75Kg (12.7lb)
Computer Interface Gigabit Ethernet-1000 BASE-T OR Wi-Fi protocol
Compliance Standards CE, RoHS
Operating Temperature 0°C to 50°C (32°F to 122°F)
Inputs/Outputs
  • RJ45 Ethernet
  • 18-pin I/O Connector
  • 41-pin Amphenol – Extended ECT Connector
  • 19-pin Amphenol Connector (RFT/NFT/MFL)
  • 4-pin Amphenol Connector (ECT)
  • 12VDC-2-pin Amphenol Power Input
Encoders 2 quadrature encoder inputs
Remote Controls
  • Start/Stop
  • Balance
  • Status
Alarms 2 independent real-time alarms
Eddy Current
Frequency Range 20Hz to 2MHz
Generators / Probe Drivers 2 fully independent
Drive Voltage 0-20 Vpp (single driver)
Output Current 1 A max
Reference Generators 2 generators for Electronic balancing
Probe Inputs 8
Number of Frequencies Up to 5 simultaneous
Data Resolution 32 bits
Data Rate 100,000 data points/s/input
Input 41-Pin Amphenol Connector OR 4-pin Amphenol connector
Additional Inspection Methods
Remote Field (RFT) and Near Field (NFT) Via 19-pin connector
Magnetic Flux Leakage (MFL) Via 19-pin connector (may require an adaptor) Probe types:
  • Inductive
  • Hall effect
  • Giant Magnetic Restrictive (GMR)